The demonstration below illustrates the Sample Mode of the TSI3 Fixed Volume Sampling System. There is also a Bypass and Vent Mode demonstration for this sampling system.
When process sample pressure is too high, or the application calls for a fixed amount of sample, the fixed volume sampler is a perfect selection. By turning one valve, you can isolate sample pressure, purge sample bottle before dispensing, and verify purge flow. Internally, our valve combines four different functions. A specific amount of sample is captured in a fixed volume chamber and blown down into the sample container with low pressure nitrogen.
Our LPG sample systems enable operators to obtain samples of liquids with high vaporization pressures. Sample is captured in a sample cylinder for easy transportation to the lab. Texas Sampling cylinder saddles help ensure proper alignment and prevent leakage when connecting the cylinder. The cylinder is safely secured to the plate by the saddles. For maximum operator safety, our design allows the operator to maintain the proper outage.
Excess sample left in the system is also vented so that the pressure in the quick connects is reduced. Simple operation and easy on / off design of the sample cylinder make our system a good choice for any high vaporization liquid or gas application.
Manual Continuous sample system is a closed loop liquid sampler that satisfies many sampling needs. This system will take emission free, representative samples of process while providing operator safety. Our patented valve design ensures zero dead volume throughout the sample valve assembly. Easy to install and operate, process pressure is used to dispense the sample into the sample bottle.
לפרטים נוספים וקבלת מפרטים
סמנו את הקבצים שתרצו להוריד